Work is coming along nicely with the Server Room, we’ve now removed the last Cisco switch from our infrastructure and the HP 5400R series switch is deployed replacing the 2530 that was in its place; over time we’ll be bringing more fibre from our edge switches into this room as well hence the number of SFP+ ports on the 5400R. The entire front of the cabinet is now populated with hardware or a blanking panel as well (panels available from Comms Express) to keep things looking tidy. I wish there were a little more that I could do with the cables coming into the 5400R however with a very narrow rack there’s not much that can be done.

Some interesting things have come out of both Rucks and PaloAlto recently in that they offer Hyper-V compatible VMs for their services which could free up a further 3U of space and remove a further 4-6 cables out of the picture.

Having recently purchased a Dell T430 tower server which we will be using for backup and Hyper-V replica I thought I’d share some photos of what the castors (an option in place of either the rack mounting kit or the floor stand feet) look like!

The castor assembly comes in a separate box to the server and only takes a minute or two to install; I perhaps was expecting slightly larger wheels however they do a good job all the same on hard floors.

WP_20151112_10_34_28_RawAs part of an ongoing project to improve the room today we’ve been installing a set of rails for a pair of Dell PowerEdge T430 servers. You may have noticed the ‘T’ in the T430 to indicate they are tower servers but Dell provides a 5U rack conversion kit which is pretty easy to install.

One small question came up while putting the rails in – ‘Where do I mount the rails in relation to the 5U of space in the rack?’ to answer that question the bottom of the rails go at the bottom of the 5Us of space. Hopefully the image to the right illustrates this better!